Siemens ST950 Plus+ - Page 114

ST950 Plus+ User Manual
ST950 Plus+ User Manual
Page 114 of 176
667/HE/53000/000
Issue 2
Unrestricted
Affix the battery label in the space provided as shown below.
Cell and Label in fitted
RTC Battery
Ensure that during commissioning any battery isolation strip is removed.
Time Check
Check the time reported by the controller after inserting new battery and correct if necessary.
NTP Server
Where the controller is connected to a network and configured to use NTP the clock will
automatically be set when the controller synchronizes to the NTP server.
6.9.3 Loading IC4 Configuration
The ST950 controller requires an IC4 configuration to be loaded for correct operation.
Configurations can be loaded by using;
• Status and Configuration → Controller → IC4 Config → Import Config web page