Siemens ST950 Plus+ - 1 Introduction; Purpose; Contact Us; Reference Documents

ST950 Plus+ User Manual
ST950 Plus+ User Manual
Page 8 of 176
667/HE/53000/000
Issue 2
Unrestricted
1 INTRODUCTION
Purpose
The purpose of this handbook is to describe the procedures for the Installation and Commissioning
of the ST950 Plus
+
system and to provide guidance on routine maintenance and fault finding.
This handbook has been created in accordance with the requirements of BS EN 12675:2001 and
BS 7987:2001.
Equipment Detail
Ongoing development means that some of the delivered items may differ in detail from the photographs
included in this handbook.
Contact Us
If you have any comments on this handbook, or need any further information, you can contact us
at support.ts.uk.mobility@siemens.com.
Reference Documents
1.3.1 Controller (Essential)
Publisher
Reference Number
Document Title
ITS
667/HB/46000/001
ST950 Facilities Handbook for ST950
ITS
667/HB/46000/003
MOVA 7 HANDBOOK - ST950
ITS
667/HB/46000/004
UTMC OTU Handbook for ST950 And Stratos Outstation
ITS
667/SU/46000/000
Use of ST950 Firmware and Hardware Configurations
ITS
667/HB/46000/000
ST950 Family General Handbook
ITS
667/HH/46000/000
ST950 Family Handset Handbook
ITS
667/HU/46000/000
ST950 User Interface Handbook
ITS
667/GA/53000/ETC
Plus
+
Top Level General Assembly
ITS
667/DZ/53000/000
ST950 Plus
+
Family Tree
1.3.2 Intersection Design
Publisher
Reference Number
Document Title
ITS
667/HQ/53000/200
ST950 Plus
+
Layout Design Tool Quick Start Guide
ITS
667/HE/31699/000
Loop Inductance and Turns Calculation Spreadsheet
ITS
667/HB/20168/000
IC4 Configurator Handbook