9 – 85
Terminal assignment
Settings
Setting principle (page 9-81)
Indicators
(page 9-81)
Testing
(page 9-81)
Terminal assignment of digital input module
X4 Inputs 4-6
X5 Inputs 1-3
Settings of digital input module
BUS INPUT
Inputs 1-6 are active.
If there is an input signal present, a corresponding message is transmitted
to the BUS via the COM15/16 module.
PARAMETER SWITCH Input 1 is used for parameter switchover. All other inputs have no function.
No input signal (LED 1 not lights up):
Parameter set A activated
Input signal available (LED 1 lights up):
Parameter set B activated
NOTE
The parameter switchover query can be overruled by a query via the BUS communication, the BDA or the graphical display.
To Next Page
Loading...
