9 – 86
9.2.3.4 Digital output modules
Function
With digital output modules, up to 6 signals can be transmitted.
If the trip unit signals an event, the corresponding LED lights up after the adjusted delay time has elapsed, and the module sets a signal at
the corresponding output.
Digital output modules are available in the following versions:
- with rotary coding switch and relay outputs
- configurable and with relay outputs
Installation
(page 9-78)
Connection
Connection setup (page 9-78)
If a combination of digital output modules with rotary switch and configurable digital outputs is to be connected to a circuit breaker,
the following can be connected per circuit breaker:
- 1 digital output module with rotary coding switch and output assignment 1
- 1 digital output module with rotary coding switch and output assignment 2
- 1 configurable digital output module
To Next Page
Loading...
