de Troubleshooting
disturbance Cause and troubleshooting
"E: 36 / -10" Inadmissible extension mounted on the water
drainage hose.
▶ Remove impermissible extensions from the water
drain hose. Connect device
"E: 36 / -25 / -26" The drain pump is blocked.
▶ → "
Cleaning the drain pump ", page 57
"E: 10 / -00 / -10 /
- 20 "
The intelligent dosing system pump is blocked.
1. Turn off the device.
2. Clean the pump unit.
→
"Cleaning the detergent drawer", page 55
3. If the display reappears, call customer service.
→
"Customer service", page 76
Note: You can start the washing program if you
deactivate the intelligent dosing system and dose
manually.
→
"Keys", page 26
Water pressure is low. No
fix possible.
The filters in the water inlet are blocked.
▶ Clean the filters in the water inlet →
Page 60.
The tap is closed.
▶ Open the faucet.
The water inlet hose is kinked or pinched.
▶ Make sure that the water inlet hose
is not kinked or pinched.
The detergent drawer is not pushed in all the way.
▶ Slide the detergent drawer up to
Stop a.
Pump unit is not inserted.
1. Place the pump unit in the detergent drawer.
→
"Cleaning the detergent drawer", page 55
2. Push in the detergent drawer as far as it will go.
flashes. The voltage control system detects impermissible
voltage undershoot.
▶ No fix possible.
Note: When the power supply has stabilized, the
program continues as normal.
64
To Next Page
Loading...
