Copyright © Sigicom AB 2020 19
5.1.3. Setting a non-default APN for a mini-SIM card
This section is only for customers using their own mini-SIM card.
APN is the name of a gateway between the mobile network and the public
Internet. Set the APN according to:
1. On a PC, make a text file with the name extapn.txt with the
desired APN in its first (and only) line.
2. Set the D10 in USB mode and copy the file above to the root of
the SD-card.
3. Reboot. This will configure the internal APN in the configuration
4. When succeeded, the file name above is changed to _extapn.txt
5.1.4. Remote live and Agenda
The Remote live function is used together with Agenda to continuously
receive Interval values during some hours a day, for example during office
hours. Please contact Sigicom support for further information.
5.1.5. Other configuration files
• bustrig.txt: The default setting is that if one sensor triggers a
transient, all other sensors will also be triggered (= all sensor will
record a transient each, simultaneously). The file bustrig.txt
shall be placed in the config directory. If you want to shut off the
bus trigger functionality then let the content of this file be the
single character: 0 (a zero).
• ntpserver.txt: Defines the hostname of the server used in the
clock/time synchronization
To Next Page
Loading...
Need help?
General
