EasyManuals Logo

Sigicom INFRA D10 Micro User Manual

Default Icon
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Copyright © Sigicom AB 2020 5
1. Introduction
1.1. The INFRA System
The INFRA system is a complete system for construction site monitoring,
from sensor to web presentation, including post processing and reporting
functions. Various ambient disturbances can be monitored, such as
vibrations, noise, dust and several geo-tech quantities.
1.2. INFRA D10 Datalogger
INFRA D10 is a digital datalogger replacing the older INFRA
Master/Mini. It is compatible with all bus cable connected sensors of the
INFRA system. Monitoring data is buffered on the memory card and is
sent when the next cellular communication takes place. If cellular
communication is not possible, data is kept for later transfer. SMS with
event data can be sent directly from the instrument to one or several cell
phones. Project administration, data presentation, reports, analysis and
graphs can easily be performed with INFRA Net.
1.3. INFRA D10 Micro Datalogger
INFRA D10 Micro replaces the older INFRA Micro. Differences from
INFRA D10 are:
Lead-Acid battery instead of Li-Ion
Industrial enclosure more suitable for permanent installation
Antenna located inside the enclosure
Multi-inlet cable gland instead of external power and USB
connectors

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sigicom INFRA D10 Micro and is the answer not in the manual?

Sigicom INFRA D10 Micro Specifications

General IconGeneral
BrandSigicom
ModelINFRA D10 Micro
CategoryData Loggers
LanguageEnglish

Related product manuals