Copyright © Sigicom AB 2020 48
• On a new battery, first attach the short special battery cable to the
battery. It is recommended to always keep this cable on the
battery for safe and easy connection to external chargers etc.
• Ensure the D10 Micro is mounted securely on the wall
• Put the battery in-place into the D10 Micro enclosure
• Attach the strap to hold the battery in-place
• Connect the short special cable to one of the connectors of the
longer battery cable
• Start the D10 Micro and check the state of charge of the battery
To Next Page
Loading...
Need help?
General
