SIGLENT
60 SSA3000X User Manual
2.5.1.4 Calibration
Auto Cal
When “Auto Cal” open, SSA3000X will process self-calibration regularly. Within half an hour after
power-on, the device executes a self-calibration every 10 minutes.
2.5.1.5 System Info
1. System Info
Product Model , Serial and HOST ID
Software Version and Hardware Version
Calibration Date
Option Information
2．Firmware Update
Update firmware
2.5.1.6 Data and Time
The system time is displayed in “ymd”, “mdy”, “dmy” format in user interface.
2.5.1.7 Self Test
Screen Test
Test whether the screen has a dot defect using five colors: White, Red, Green, Blue and Black.
Press any key to switch the screen color and exit the test.
Keyboard Test
Enter the keyboard test interface. Press the function keys at the front panel one by one and
observe whether the corresponding key be checked. If not, an error may have occurred in that key.
To exit the test, press “<-“ four times.
LCD Test
If the keys at the front panel are transparent, when the key is pressed , the corresponding backlight
will turn on when testing it.
2.5.2 Display
Control the screen display of the analyzer, such as setting the display grid brightness.
1．Grid brightness
Control the display grid brightness.
To Next Page
Loading...
Need help?
General