SIGLENT TECHNOLOGIES SSA3032X User Manual

SIGLENT
SSA3000X User Manual 63
2.6 Shortcut Key
2.6.1 Preset
Recall the preset setting and restore the analyzer to a specified status.
 Press System ->Pwr On/Preset .Preset to select “Def”, “Last” or “User”.
 Press Preset to load the factory settings listed in the following table (except items marked
with “**”) or User-defined settings.
Table 2-60 Factory Settings
Parameter
Default
Frequency
Center Freq
1.6 GHz (or 1.5 GHz, 1.05 GHz, 900 MHz, 750 MHz, 500 MHz)
Start Freq
0 Hz
Stop Freq
3.2GHz (or 3.0 GHz, 2.1 GHz, 1.8 GHz, 1.5 GHz, 1.0 GHz)
Freq Step
Auto, 320MHz (or 300MHz, 210MHz, 180MHz, 150MHz, 100MHz）
Span
Span
3.2GHz (or 3.0 GHz, 2.1 GHz, 1.8 GHz, 1.5 GHz ,1.0 GHz)
Amplitude
Ref Level
0 dBm
Attenuator
Auto, 20 dB
Preamp
Off
Units
dBm
Scale/Div
10 dB
Scale Type
Log
Ref Offset
0 dBm
Corrections
Off
BW
RBW
Auto, 1MHz
VBW
Auto, 1MHz
VBW/RBW
1
Avg Type
Log Pwr
Sweep
Sweep Time
Auto, 312.416 ms (or 312.416 ms, 216.288 ms, 192.256 ms, 168.224
ms, 120.160 ms)
Sweep Rule
Speed
Sweep
Continue
Sweep Mode
Auto
Numbers
1
Trig
Trigger Type
Free Run
Video Trigger
0 dBm

SIGLENT TECHNOLOGIES SSA3032X Specifications

General

Brand	SIGLENT TECHNOLOGIES
Model	SSA3032X
Category	Measuring Instruments
Language	English