Sigma 2-16P User Manual

Operating Manual SIGMA 2-16P page 43 of 75
04/2007
5.3.7 Activating/Deactivating the Automatic Lid Opening Function
The Auto-Lid-Open function must be activated so that the lid opens automatically
at the end of the operation:
• Press the lid key three times when the lid is open and on the third time hold it
down for approx. two seconds.
• Proceed in the same way in order to deactivate the function.
After every change, the current status of the setting is displayed in the form of a
message running over the display ("Auto-Lid-Open on" or "off").
5.3.8 Activating/Deactivating the Sound Signal
If this function is active, a sound signal can be heard at the end of the operation
as well as in the event of an error message or imbalance.
• Press the lid key five times and on the fifth time hold it down for approx. two
seconds.
• Proceed in the same way in order to deactivate the function.
After every change, the current status of the setting is displayed in the form of a
message running in the display ("Buzzer on" or "off").

Sigma 2-16P Specifications

General

Brand	Sigma
Model	2-16P
Category	Laboratory Equipment
Language	English