Sigma 3-16P - Page 56

Version 06/2007, Rev. 1.15 of 16/09/2011 - sb page 56 of 75
Translation of the original operating manual
Part no.
Description Max. speed
(rpm)
Max.
gravitational
field (x g)
18016 Rectangular carrier for 4 culture tubes 15 ml (Nunc,
Corning, Falcon, Greiner) e.g. 15115, polypropylene
18017 Rectangular carrier for 10 tubes 15 ml, and tubes with
stopper, max. Ø 17.5/19,5 x 80 - 112 mm, e.g. Monovettes
9 ml and 10 ml, polypropylene
18025
Rectangular carrier for 5 glass tubes 25 ml, max. ∅ 24 x 85
- 105 mm, e.g. 15025, 15026, polyallomer
18022 Rectangular carrier for 4 sterilin tubes 30 ml, graduated up
to 20 ml, flat or round bottom, incl. cap, max. ∅ 25/31 x 65
- 95 mm, polypropylene, Barloworld Scientific Ltd.
18030 Rectangular carrier for 5 tubes with screw cap 27 - 30 ml,
max. ∅ 25.4/27.5 x 80 - 110 mm, e.g. 15029, 15030,
15032, polypropylene
18050
Rectangular carrier for 2 tubes 50 ml, max. ∅ 35/38 x 85 -
110 mm, e.g. 15049, 15050, 15056, polyallomer
18051 Rectangular carrier for 2 tubes with screw cap 40 - 50 ml,
max. ∅ 29/35 x 80 - 110 mm, e.g. 13055, 15051, 15052,
polypropylene
18052 Rectangular carrier for 2 culture tubes 50 ml (Nunc,
Corning, Falcon, Greiner) e.g. 15151, polypropylene
18053 Rectangular carrier for 2 culture tubes
50 ml with skirt (Nunc, Corning, Falcon, Greiner), max. Ø
29.5/38 x 85 - 118 mm, polypropylene
18085 Rectangular carrier for 1 tube with screw cap
78 - 85 ml, max. ∅ 38/40 x 85 - 112 mm, e.g. 13085,
15076, 15080, polyallomer
18100
Rectangular carrier for 1 tube 100 ml, max. ∅ 45.5/48 x 85
- 110 mm, e.g. 15100, 15102, 15103, 15106, polyallomer
18105
Rectangular carrier for 20 RIA-tubes 5 ml, max. ∅ 12.2 x
60 - 75 mm, flat and round bottom tubes, e.g. 15060,
decantable, polyallomer
18107
Rectangular carrier for 20 glass tubes 7 ml, max. ∅ 12.3 x
80 - 105 mm, flat and round bottom tubes, e.g. 15007,
15027, decantable, polyallomer
18115
Rectangular carrier for 20 glass tubes 7 ml, max. ∅ 12.3 x
80 - 105 mm, flat and round bottom tubes, e.g. 15007,
15027, decantable, polyallomer
18125 Rectangular carrier for 1 bottle with screw cap 125 ml,
max. ∅ 51 x 90 - 120 mm, e.g. 15125, polypropylene
18200 Rectangular carrier for 1 bottle with screw cap 125 ml,
max. ∅ 51 x 90 - 120 mm, e.g. 15125, polypropylene
11181 Swing-out rotor 48 x 15 ml complete, no. 11180,
incl. 2 sets rectangular buckets no. 13180, 2 sets
rectangular carriers no. 18015 and 48 PPCO-tubes 15 ml
no. 15023,
max. radius 17.1 cm, min. radius 7.6 cm
4 200 3 372