Sigma 3-16P - Page 63

Version 06/2007, Rev. 1.15 of 16/09/2011 - sb page 63 of 75
Translation of the original operating manual
Part no.
Description
13055 Stainless steel tube 50 ml, Ø 28.5 x 101.5 mm, sealable with cap no. 17054, suitable for
12150, 12156, 13082, 17052, 18051
17054 Stainless steel sealing cap for 13055
15051 Polyfluor tube 38 ml, Ø 28.5 x 107 mm, incl. screw cap, suitable for 12150, 12156, 13079,
13082, 17052, 17376, 18051
15052 Polypropylene Co-Polymer (PPCO) tube 42 ml, Ø 28.8 x 107 mm, incl. screw cap,
suitable for 12150, 12156, 13079, 13082, 17052, 17376, 18051
15151 Culture tube Nunc, 50 ml, pointed bottom, polypropylene, incl. screw cap, suitable for
13080, 17049, 17346, 18052, 19776
13085 Stainless steel tube 85 ml, Ø 38 x 103 mm, sealable with cap no. 17185, suitable for
12155, 12159, 17085, 17385, 18085
17185 Round stainless steel sealing cap for 13085
15076 Polypropylene Co-Polymer (PPCO) tube 78 ml, Ø 38 x 112 mm, incl. screw cap, suitable
for 12155, 12159, 17085, 17385, 18085
15080 Polyfluor tube 81 ml, Ø 38 x 112 mm, incl. screw cap,, suitable for 12155, 12159, 17085,
17385, 18085
15102 Polypropylene tube 120 ml, Ø 45 x 100 mm, suitable for 17101, 17390, 18100
15103 Polycarbonate tube 110 ml, Ø 45 x 100 mm, graduated 2 up to 100 ml in 2 ml increments,
suitable for 17100, 17101, 17390, 18100
15125 Polypropylene bottle 125 ml, Ø 51 x 99 mm, incl. screw cap, suitable for 17125, 17395,
18125
15202 Polypropylene Co-Polymer (PPCO) bottle 190 ml, Ø 56 x 112 mm incl. screw cap, suitable
for 13104, 17400, 18200
13255 Stainless steel bottle 250 ml, Ø 61.4 x 125 mm, sealable with cap no. 17256, suitable for
17347
17256 Round stainless steel sealing cap for 13255
15247 Polyfluor bottle 250 ml, Ø 61.4 x 122 mm, incl. screw cap, suitable for 17347
15249 Polypropylene Co-Polymer (PPCO) bottle 250 ml, Ø 61.4 x 125 mm, incl. screw cap,
suitable for 17347
Centrifuge glass tubes
Part no.
Description
15007 Centrifuge glass tube 6 ml, max. 4.000 x g, Ø 12 x 100 mm, suitable for 17007, 17354,
18007, 18107
15027 Centrifuge glass tube 7 ml, max. 4.000 x g, Ø 12 x 100 mm, graduated 1 up to 7 ml
in 0.5 ml increments, suitable for 17007, 17354, 18007, 18107
15015 Centrifuge glass tube 10 - 12 ml, max. 4.000 x g, Ø 16 x 100 mm, suitable for 17015,
17358, 18015, 18115
15024 Centrifuge glass tube 12 ml, max. 4.000 x g, Ø 16 x 100 mm, graduated 0.1 ml up to 10 ml
in 0.1 ml increments, suitable for 17015, 17358, 18015, 18115
15022 Glass tube 13.5 ml, max. 4.000 x g, Ø 17 x 110 mm, suitable for 12150, 12156 with 16018
and for 12155, 12159 with 16019
15025 Centrifuge glass tube 26 ml, max. 4.000 x g, Ø 24 x 100 mm, suitable for 17025, 18025