94
SHOWING A SLIDESHOW
TO STOP/PAUSE A SLIDESHOW
Press
＜
CANCEL
＞
to stop a slideshow and return to the previous view
(Single-Image, Contact Sheet, etc.).
• The image that the slideshow stops on will become the currently selected image.
TO RESUME A STOPPED SLIDESHOW
1
Press
＜
MOD
＞
to display the Modification
Menu.
2
Use the
＜
／
＞
arrows on the 4-way
controller to select the Slideshow Menu.
3
If not already selected, use the
＜ ／ ＞
arrows on the 4-way controller to select
“Resume show”.
4
Press
＜
OK
＞
to close the Modification Menu
and resume the slideshow.
• The slideshow will resume with the next image
in the sequence following the one the slideshow
was stopped on.
TIP
• It will not be possible to resume a slideshow that has stopped automatically after
the last image. (See P.95 for setting slideshow repetition.)
• Pressing ＜ MENU＞, ＜ VIEW＞ or the shutter release will also stop a
slideshow, however, it will not be possible to resume a slideshow stopped in this
manner.
To Next Page
