Signode BPT-H32 - Technical Data

48 of 50
V 11.21_EN
SIGNODE BPT-H32
7 Technical data
BPT-H32
Weight 8.3 kg (18 lb) (incl. battery, 4 Ah)
Dimensions Length: 405 mm width: 283 mm Height: 270 mm
(16″) (11″) (10.6″)
Strap tension 2000–7500 N (440–1650 lbf)
Tension speed 75 mm/s (2.95 in/s)
Sealing Sealjoint with double notch
Seale󰀩ciency
depending on strap quality,
dimension and seals approx. 75% of strap tensile strength
Typical measured A-rated
emission sound pressure level*
– EN 60745-1/2:2009 L
pA
65 dB (A) (Deviation 3,0 dB)
Average sound power level*
– EN 60745-1/2:2009 L
WA
76 dB (A) (Deviation 3,0 dB)
Vibrations at handle*
– EN 60745-1/2:2009 a
h
< 2,5 m/s
2
(Deviation 1,5 m/s
2
)
Operating temperature for the
strapping tool (see separate oper-
ating instructions for battery and
charging device) –10 °C to +40 °C (14–104 °F)
Relative humidity Up to 90 %
CHARGER / BATTERY
Rated voltage charger 100 / 110 / 230 V
Charger type BOSCH GAL 1880 CV (US: BC 1880)
Charging time 4 Ah: 30 min. = approx. 80%, 50 min. = approx. 100% capacity
8 Ah: 70 min. = approx. 80%, 80 min. = approx. 100% capacity
Strappings with one battery charge 4 Ah: 180–300 depending on strap, strap tension and package
8 Ah: 360–600 depending on strap, strap tension and package
Battery Bosch Li-Ion ProCORE 18 V/4 Ah, 18 V/8 Ah
* refer to Section 2.4, Vibration and noise exposure