Signode BPT-H32 - EC Declaration of Conformity (Copy)

49 of 50
V 11.21_EN
SIGNODE BPT-H32
BPT-H32
STEEL STRAP
Strap width 19 mm (
3
/
4
″) 25 mm (1″) 32 mm (1
1
/
4
″)
Normal quality:
Tensile strength up to approx. 850 N/mm
2
850 N/mm
2
850 N/mm
2
Strap thickness 0.60–0.80 mm* 0.80–1.00 mm 0.80–1.00 mm
(.023″–.031“) (.031″–.040″) (.031″–.040″)
High strength quality:
Tensile strength up to approx. 1100 N/mm
2
1100 N/mm
2
1100 N/mm
2
Strap thickness 0.60–0.80 mm* 0.60–0.80 mm* 0.60–0.80 mm*
(.023″–.031“) (.023″–.031“) (.023″–.031“)
* For strap thickness 0.60 mm (< 0.80 mm), Section 4.6.
SEALS 19 mm 25 mm 32 mm
8 EC Declaration of Conformity (copy)
(CE 2006/42/EC, Annex II 1.A.)
The manufacturer take sole responsibility for declaring that the machines to which this declaration
refers are in full conformity with the current requirements of the Council Directive of 17th May 2006
(2006/42/EC)″MachineDirective″anditsamendments.
Furthermore, electrical installations are in conformity with the requirements of the Council Directive of
26thFebruary2014(2014/30/EU)″EMCDirective″.
The following harmonised standards
were taken into account: EN 60745-1:2009 + A11:2010; EN 60745-2-18:2009;
EN ISO 12100:2010; EN ISO 13854:2019; EN 61000-6-1;
EN 61000-6-3
CBTestCerticate: NL-74349
Placeofcertication: DEKRACerticationB.V.
Meander 1051, NL-6825 MJ Arnhem, Netherlands
Type designations: BPT-H32
From machine no./ year of construction H/21051001 / 2021
CH-8953 Dietikon, 24.06.2021
R. Siegrist M. Binder
Managing Director Director-Head of Global R&D
Agent for the publication of technical documentation:
Signode Switzerland GmbH, Silbernstrasse 14, 8953 Dietikon 1, Switzerland
Manufacturer
Signode Switzerland GmbH
Silbernstrasse 14, Postfach
8953 Dietikon 1, SWITZERLAND
signode.com