12-9
▼Setting items
Chapter 12 Ethernet parameter "ETHERNET"
■CONNECTION TYPE
Specifies the connection type.
<Parameter (choice input method)> : Default value
AUTO Automatically recognizes Full Duplex/ Half Duplex.
FULL Sets to Full Duplex.
HALF Sets to Half Duplex.
■HTTP PORT
Specifies the HTTP port when using the Web function.
<Parameter (numerical input method)>
0 to 65535
Default value: 80
■PORT TIMEOUT
Selects the closing time of TCP port. Operation starts when no data is
transmitted while being transferred.
<Parameter (choice input method)> : Default value
OFF Does not time out.
5 min Set to 5 minutes.
10 min Set to 10 minutes.
15 min Set to 15 minutes.
30 min Set to 30 minutes.
To Next Page
Loading...