SIIG USB Over IP - User Manual

USB Over IP
User’s Manual
SIIG’s ONLINE SUPPORT and
Product Registration
Visit SIIG’s web site at www.siig.com and click
Support for instant technical support. Also,
click Support/Register to register your product

Summary

Chapter 1: Introduction

1-1 Unpacking the USB Over IP

Instructions for unpacking the USB Over IP adapter and verifying package contents.

1-2 System Requirements

Lists the necessary hardware and software prerequisites for using the USB Over IP.

Chapter 2: Hardware Installation

2-1 Hardware Installation

Step-by-step guide for physically installing the USB Over IP hardware unit.

2-3 USB Device Support

Lists compatible USB devices and provides interoperability information.

Chapter 3: Driver Installation and Configuration

3-1 Driver Installation

General guide for installing the necessary drivers for the USB Over IP on different Windows versions.

3-3 Set IP Address

Guides on configuring the IP address for the USB Over IP device.

3-3.2 IP Config - DiscoveryUtility

Using the Discovery Utility to configure IP settings for USB Over IP servers.

Chapter 4: USB Over IP Admin Usage

4-2 Using the USB Over IP Admin

Comprehensive guide to operating the USB Over IP Admin software for device management.

4-3.1 Device Mapping

Connecting, disconnecting, and managing device status in the mapping interface.

4-3.2 Server Manager

Detailed server configuration, including name, IP, and password management.

Chapter 5: Technical Support and Warranty

5-2 Technical Support and Warranty

Information on contacting support, warranty coverage, and product return procedures.

SIIG USB Over IP Specifications

General

Network Protocol	TCP/IP
Device Type	USB Over IP
Network Interface	10/100/1000 Mbps Ethernet
Operating System Compatibility	Windows
Power Supply	5V DC