Silca Technica EU - Guide to the Manual

Technica EU Operating manual - English
Copyright Silca 2005 1
GUIDE TO THE MANUAL
This manual has been produced to serve as a guide for users of the TECHNICA EU key-cutting machine. Read it
carefully; it is essential if you wish to operate your machine safely and efficiently
.
CONSULTATION
- Description of machine ......................................................................................................... Chapter 1
-
Transport and handling ......................................................................................................... Chapters 2-3
- Regulation and use ................................................................................................................ Chapter 4
- Maintenance ........................................................................................................................... Chapters 5-6
Technical terns
Common technical terms are used in this manual .
To assist those with little experience of keys and key-cutting, below is an illustration of the terms most frequently
used
.
Fig. 1
1) Head
2) Rim
3) Tip
4) Bit
5) Shoulder
6) Side
1
2
4
3
5
6