SEF3 2000 C4
■ 16
│
GB
│
IE
Troubleshooting
PROBLEM POSSIBLE CAUSE
POSSIBLE
SOLUTIONS
The appliance is not
working.
or
The Power control lamp 0
does not light up.
The appliance is not connected
to a mains power socket.
Connect the appliance to
a mains power socket.
The appliance is damaged.
Contact the Customer
Service department.
The On/Off switch 8 has not
been activated.
Press the On/Off switch 8.
The thermal cut-out has been
triggered.
Switch the device off at
the On/Off switch 8 and
disconnect the mains power
plug from the mains power
socket. Wait until the appli-
ance has cooled down.
The Ready control lamp 9
does not light up.
The selected temperature for
the cooking oil/fat has not
been reached.
Wait a few minutes until the
required temperature has
been reached.
If the malfunction cannot be corrected with the above suggestions, or if you have found some
other kind of malfunction, please contact our Customer Service department.
Appendix
Disposal of the appliance
The adjacent symbol of a crossed-out dustbin means that this appliance is subject
to Directive 2012/19/EU. This directive states that this appliance may not be
disposed of in the normal household waste at the end of its useful life, but must
be taken to specially set-up collection locations, recycling depots or disposal
companies.
The disposal is free of charge for the user. Protect the
environment and dispose of this appliance properly.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility and is
collected separately.
To Next Page
Loading...
