Silvercrest SRH 5 A1 - FM Station Info and Bluetooth; Pairing Bluetooth Devices

■ 14
│
GB
│
IE
│
NI
SRH 5 A1
Searching for stations manually
♦ Briefly press the TUNE+ 8 or TUNE− button7 to change the FM fre-
quency in 0.05 MHz increments. The current FM frequency is shown on the
display1.
Saving stations manually
♦ To store the current radio station manually, first briefly press the PRESET
button5. The display 1 shows the preset space with the last selected
radio station (if radio stations have already been stored). If no radio stations
have yet been stored, the display shows Preset 1 empty.
♦ Press the TUNE+
8 or TUNE− button7 to select the desired preset.
♦ Press the VOLUME | ENTER / SCAN dial6, to store the station in
the selected preset. The preset space of the stored station is shown in the
upper right corner of the display 1 (e.g. P1 for preset 1).
Station information
In FM radio mode, you can show additional station information on the display 1:
♦ Briefly press INFO / MENU
4 repeatedly to display the following channel
information:
– Programme type (Pty)
– Signal strength (bar)
– Time/date
– Scrolling text (radio text)
Playback via Bluetooth
®
Pairing devices
Before you start using the radio for music playback via Bluetooth
®
you must
pair it with a Bluetooth
®
-compatible external playback device.
♦ If necessary, briefly press the button 2 to switch on the device.
♦ If necessary, briefly press the SOURCE/
button 3 several times to activate
the Bluetooth
®
function. You will hear a beep and Pairing flashes on the
display 1.
♦ Set the external playback device so that it scans for Bluetooth
®
devices.
You can find a detailed description of how to do this in the operating
instructions for your external playback device.
♦ From the list of discovered Bluetooth
®
devices in the settings menu of your
external playback device, select the entry SRH 5 A1. The external playback
device will now connect to the radio automatically via Bluetooth
®
.
You will hear another beep when the connection has been successfully
established and Connected appears on the display1.
You can now use the radio to listen to music from your external playback device
wirelessly via the radio's speaker.