EasyManua.ls Logo

Silvercrest SRH 5 A1 - Cleaning; Cleaning the Housing; Storage When Not in Use

Silvercrest SRH 5 A1
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
IE
NI
 23
SRH 5 A1
Fault Possible cause Remedy
No automatic
setting of time and
date.
The RDS signal is not
available.
Pull out the telescopic aerial
0 com-
pletely. Try to improve reception by
moving the telescopic aerial
0 or by
moving the radio to another location.
NOTE
If you cannot solve the problem with the solutions given above, please
contact the Service Hotline (see section Service) .
Cleaning
DANGER
Risk of fatal injury from electrocution!
Pull out the plug of the mains adapter from the power socket before starting
to clean the device.
CAUTION
Damage to the device!
To avoid irreparable damage to the device, ensure that no moisture can
penetrate the device during cleaning.
Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the device.
Cleaning the housing
Clean the surfaces of the device with a soft, dry cloth.
Use a lightly moistened cloth and a mild detergent to remove stubborn dirt
residues.
Storage when not in use
If you decide not to use the device for a long period, disconnect it from
the mains power supply and store it in a clean, dry place away from direct
sunlight.

Table of Contents

Other manuals for Silvercrest SRH 5 A1

Related product manuals