Silvercrest SRH 5 A1 - Manual Date Setting

GB
│
IE
│
NI
│
19 ■
SRH 5 A1
Setting the date
♦ In the Settings menu, press the TUNE+ 8 or TUNE− button7 repeatedly
until Time setup appears on the display
1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ Press the TUNE+
8 or TUNE− button7 until Set date appears on the
display
1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
Set date appears on the display
1 and the date display flashes.
♦ Press the TUNE+ 8 or TUNE− button7 to set the day.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The month flashes on the display
1.
♦ Press the TUNE+ 8 or TUNE− button7 to set the month.
♦ Press the VOLUME | ENTER/SCAN dial6 to confirm the entry.
The year flashes on the display
1.
♦ Press the TUNE+
8 or TUNE− button7 to set the year.
♦ Press the VOLUME | ENTER/SCAN dial6 to confirm the entry.
NOTE
► In standby mode, press the VOLUME |
ENTER / SCAN dial6 to
switch between the time and date display.
12h/24h display
NOTE
► If the 12h display is set, PM appears on the bottom left of the display
1
from 12 noon until 11:59 at night. From midnight to 11:59 AM, AM
appears on the display 1.
► The default setting for the time is 24h display.
♦ In the Settings menu, press the TUNE+
8 or TUNE− button7 repeatedly
until Time setup appears on the display 1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ Press the TUNE+
8 or TUNE− button 7 until Set 12/24 hour appears
on the display
1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ Press the TUNE+ 8 or TUNE− button7 to switch between the 12 hour
setting (Set 12 hour) or the 24 hour setting (Set 24 hour).
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.