Sim2 SuperCube - Setup>>Advanced Menu

– 31 –
English
SETUP>>Advanced Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
SETUP>>Advanced menu. Press the cursor ▲▼ button to move up and down in the
SETUP>>Advanced menu.
ITEM
DESCRIPTION
Audio
Press the ENTER button to enter the Audio sub menu. See Audio on page 32.
Lamp
Press the ENTER button to enter the Lamp sub menu. See Lamp on page 32.
High Altitude Mode
Press the cursor ◄► buttons to turn on or off High Altitude Mode.
Recommended to turn on when the altitude of the environment is higher than 1500m
(4921ft).
Test Pattern
Press the cursor ◄► buttons to select Test Pattern.
Closed Caption
Press the ENTER button to enter the Closed Caption sub menu.
See Closed Caption on page 33.
12V OUT A
Press the cursor ◄► buttons to adjust 12V OUT.
Reset All
Press the ENTER button to enter reset all settings to default values.