2.1.3 TecHnical SPeciFicaTiOnS
The machine is available in the following ver-
sions:
• single-phase 120 V 60 Hz (tank and waterline)
• single-phase 230 V 50 Hz (tank and waterline)
• single-phase 230 V 60 Hz (waterline)
The relative power absorbed is indicated on the
machine plate.
2.1.4 cOnnecTiOn TO THe POW-
er line
WARNING
RISK OF SHORT CIRCUITS
• Plug the machine into the mains socket; the
LED of the on switch will begin to flash.
• Hold down the on switch for 2 seconds.
• The fact that the machine is operating is
shown by the LED of the on switch and all
delivery keys, which remain lit.
For creamy coffee, wait about 25 minutes after
switching on the machine.
NOTE
Once the auto diagnosis has been completed all
the keys are activated.
To Next Page
Loading...
