Simonelli MUSICA - Removal of the Front Panel

3.5 reMOval OF THe FrOnT
panel
NOTE
To remove the front panel, it is necessary to
remove the right side panel first.
1 Loosen the locking nut “A” of steam valve
using a 3 mm Allen key.
2 Release the valve by pulling the steam lever
“B” towards the machine front side.
3 Loosen the upper screws “C” of the front
panel using a 3 mm Allen key.
4 Loosen the lower screws “D” of the front
panel using a Phillips screwdriver.
Ed. 01 of 12/2015
3.6
Service Manual
1
2
A
B
Fig. 34
C
C
Fig. 35
D
D
Fig. 36