2.3 cOFFee DOSe SeTTinG
To enter the programming mode, proceed as fol-
lows:
NOTE
The procedure can be carried out with the
machine on.
• To enter the dose programming mode, it is
necessary to press and hold down the con-
tinuous dispensing key
for 5 sec.
• The delivery keys will begin to flash.
Coffee dose setting
To programme the amount of water for each of
the delivery keys, proceed as follows:
• Fill the filter holder with the right amount of
coffee (the double or single filter holder can
be used, according to the key to be pro-
grammed).
• Place the filter holder in the group.
• Press one of the delivery keys:
• Dispensing will commence; once the required
quantity has been poured, press the same
key again.
• Press the
key to quit the programming
mode.
To Next Page
Loading...
