Simonelli MUSICA - Heating Element Replacement

To remove the heating element, proceed as fol-
lows:
1 Empty the heater as described above.
2 Loose the nut “A” using a 30 mm wrench.
3 Remove with care the panel out of its slot
NOTE
Each time you replace the heating element,
it is also necessary to change the O-ring “B”,
which insulates it from the heater, as it is a
part subject to wear. This component must be
ordered along with the heating element.
5.3 HEATING ElEMENT AND
HEAT PROTEcTION
To access the heating element, remove the right
panel of the cover.
The visible parts are:
A 167° heat protection.
B Electrical connections of heating ele-
ment.
MUSICAheater featuresa 1200 Wheating ele-
ment.
Ed. 01 of 12/2015
5.5
SERvIcE MANuAl
B
Fig. 68
Fig. 69
A
B
Fig. 66
A
Fig. 67