Simonelli MUSICA - Page 51

3 Using a 24 mm wrench, remove the fixed
part “C”.
4 Disconnect the hydraulic connections “D”
by using a 12 mm wrench.
5 Loose the locking screws “E” to release the
valve from the machine frame.
6 Make sure the plunger is clean and there are
no obstructions. Replace the valve if it is not
working.
Ed. 01 of 12/2015
6.5
Service Manual
E
D
D
Fig. 86
Fig. 87
C
Fig. 85