Simonelli MUSICA - Page 55

4 Remove the locking nut “B” using a 14 mm
wrench and take the electrovalve out.
5 Unscrew the fitting “C” using 2 wrenches.
The fitting has two digits useful for reassem-
bly:
1= water inlet
2= water outlet.
2 Disconnect power connections using twee-
zers.
3 Remove the inner rear panel (tank hous-
ing) by loosening the 4 screws “A” using a
Phillips screwdriver.
C
Fig. 98
Fig. 95
B
Fig. 97
A
A
Fig. 96
Ed. 01 of 12/2015
6.9
Service Manual