Simoniz S1750 - IMPORTANT PRECAUTIONS - READ FIRST; Safety Warnings

3
IMPORTANT PRECAUTIONS – READ FIRST
Safety Warnings
• When using this product, basic precautions should always be followed: Read all the
instructions before using the product.
• High-pressure jets can be dangerous if subject to misuse. The jet must not be directed at
persons or animals.
• Water spray must never be directed towards any electric wiring, devices or directly
towards the pressure washer machine itself or fatal electric shock may occur.
• To reduce the risk of injury, do not operate the machine near children.
• Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with
the controls.
• Stay alert—watch what you are doing.
• Wear safety goggles.
• For use with cold water supply only. Do not draw other liquids.
• Do not use acids, solvents, or any other ammable material in this product. These prod-
ucts can cause physical injuries to the operator and irreversible damage to the machine.
• To reduce the risk of electrocution, keep all connections dry and off the ground. Do not
touch plug with wet hands.
• The pressure washer should not be used in areas where gas vapours may be present. An
electric spark could cause an explosion or fire.
• To minimize the amount of water getting into the pressure washer, the unit should be
placed as far as possible from the cleaning site during operation.
• Avoid accidental starts. Shut power “OFF” before connecting or disconnecting cord to
electrical outlets.
• Do not operate the product when fatigued or under the inuence of alcohol or drugs.
• Do not stand on unstable surfaces. Stand with both feet balanced at all times.
• Prior to starting the pressure washer in cold weather, be sure ice has not formed in any
part of the equipment.
• Never carry your pressure washer by the cord.
• Do not pull on the cord to disconnect from the outlet.
• To allow free air circulation, the pressure washer should not be covered during operation.
• The Trigger Gun Safety Lock prevents the trigger from accidentally being engaged. This
safety feature does not lock trigger in the “ON” position.