8
OPERATING INSTRUCTIONS
1
2
3
Remove and discard the cover. Separate
quick-connect coupler assembly. Attach
quick-connector coupler (M2) onto the gar-
den hose and attach the inlet adaptor (M1)
into the inlet.
Fill the detergent container with detergent and
push lid firmly onto container. Attach detergent
suction tube onto detergent lid and attach
container to the pressure washer container
storage area as shown.
Insert the desired wand with nozzle into
spray gun, and twist 1/4 turn until rectangu-
lar tab appears.
(when using detergent)
4
Attach garden hose to water supply and turn
water on.
M1
M2
To Next Page
Loading...
