Simplex 4100 Series User Manual

Page 15 of 60
1.1.3.1.3 Wrong Device
Description:
The panel is getting a response from the displayed address that does not match the device programmed to
that address.
Possible causes:
 Incorrect device installed (Relay with T-Sense fitted instead of standard Relay)
 Incorrect head installed (Photo instead of Heat)
 Detector head not making good contact with base
Suggested solutions:
NO
YES
Replace Device /
Sensor
Retrieve the part number from the
device (409x-xxxx)
Device or Program
change will be required
Replace Base
Contact the Programmer
to confirm device
matches Program

Simplex 4100 Series Specifications

General

Brand	Simplex
Model	4100 Series
Category	Transmitter
Language	English