Simplex 4100 Operation

xii
This publication has been created as an addendum to the 4100/4100+ Fire
Alarm Operating Instructions (574-018), to document the operation of the
TrueAlert features specific to Version 9.X of the 4100/4020 firmware.
Applications may vary due to custom programming and local code requirements.
Refer to the following documents for additional information.
Title Document
TrueAlert Addressable Controller Installation Guide 574-762
TrueAlert Addressable Controller Application Guide 574-796
4100 Fire Alarm Front Panel Operation Instructions
Rev. 8.01 Addendum
574-121
About this Document
Introduction
Related Documents
firealarmresources.com

Simplex 4100 Specifications

General

Type	Fire Alarm Control Panel
Manufacturer	Simplex
Model	4100
Network Capability	Yes
Addressable	Yes
Power Supply	120/240 VAC, 50/60 Hz
Display	LCD
Annunciator Support	Yes
Battery Backup	Yes
Releasing Capability	Yes
Max Devices	Depends on configuration
Max Notification Appliance Circuits (NAC)	Varies with configuration
Max Releasing Circuits	Varies with configuration
Max Remote Annunciators	Varies with configuration
Communication Ports	Multiple
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
NAC Outputs	4 (expandable)
Networking	Yes