Simplex 6351 - Manual Override for GENERATOR Output; Manual Override for SERIAL BCD Output

Operating Manual Override Switch(es) for GENERATOR Output
ON
- Placing switch in ON position turns generator motor ON.
AUTO - Placing switch in AUTO position allows stored program to turn generator motor ON and OFF.
I
Note: Generator motor comes on 60 seconds before a programmed event occurs.
OFF - Placing switch in OFF position disables generator motor control.
Operating Manual Override Switch(es) for SERIAL BCD Output
ON -
Placing switch in ON position outputs serial data (correction) once a second.
OFF - Placing switch in OFF position disables correction output.
31
firealarmresources.com