1 STBY key
Press to turn the autopilot to Standby mode.
2 MENU/X key
With no menu active:
• Press to display the Settings menu
• Press and hold to display the Display setup dialog
Menu and dialog operation:
• Press to return to previous menu level or to exit a dialog
3 Rotary knob
Menu and dialog operation:
• Turn to move up and down in menus and dialogs
• Turn to adjust a value
• Press to select a menu option and to enter the next menu
level
In FU mode:
• Turn to set rudder angle
In AUTO, NoDrift and Wind mode:
• Turn to change set heading/set course/set wind angle
4 MODE key
Press to display the Mode list
5 AUTO key
Press to turn the autopilot to AUTO mode
8
Introduction | AP44 Operator Manual
To Next Page
Loading...
