Simrad AP44 User Manual

Autopilot modes
Mode Activate Mode display Rotary knob
Press Rotate
Standby
STBY
Switch to
FU mode
No action
Follow-up From any mode:
select the Follow-up
option in the Mode
list.
From Standby mode:
press the rotary knob.
No action Set the
rudder
angle
AUTO
AUTO
No action Adjust
the set
heading
Wind* From AUTO mode:
select the Wind
option in the Mode
list
No action Adjust set
wind
NoDrift From AUTO mode:
select the NoDrift
option in the Mode
list.
No action Adjust the
set course
NAV From any mode:
select the NAV option
in the Mode list.
No action No action
¼ Note: * Mode is only available when the boat type is set to SAIL.
The autopilot page
The content varies with active mode. All modes include:
• Response (AC12N/AC42N/SG05) / Profile (NAC-2/NAC-3) mode (A)
• Heading indicator, analog and digital (B)
• Autopilot mode indication (C)
• Rudder indicator, analog and digital (D)
Display setup
x
3s
When the Backlight level field is active, subsequent presses on the MENU key adjusts
backlight level in decrements of 30% .
Selecting an autopilot mode using the MODE key
Press the MODE key and select the relevant option from the Mode list.

Simrad AP44 Specifications

General

Interface	NMEA 2000
Power Supply	12/24 V DC
Water Resistance	IPX6
Operating Temperature	-15°C to +55°C
Display Size	4.1 inches
Display Type	LCD
Control Type	Rotary dial and buttons
Operating Voltage	10-31.2 V DC
Control Modes	Auto, Nav, Wind