Simrad AP80 Operation Manual

32 |
Work pro le setup | AP70/AP80 Operator Manual
Edit a pro le
You can edit profi le name, icon and settings for all profi les, also for the Normal profi le.
 Note: It is not recommended to change any of the auto steering parameters in the Normal
profi le after the vessel is commissioned.
1. Press the WORK key to display all work profi les
2. Turn the rotary knob to select the edit icon on the work profi le you want to change
3. Make the required changes and save the new settings
 Note: Refer to “Work profi le setup” on page 28 for details about work profi le settings.
Importing and exporting work pro les (AP80 only)
It is possible to export and import a work profi le to/from a USB stick.
Export
1. Press the WORK key to display all work profi les
2. Turn the rotary knob to select the edit icon on the work profi le you want to export
3. Select Save to disk
- The Files dialog will be displayed
4. Select the USB
5. Press the MENU key and confi rm your selection
 Note: only 6 character can be used to identify the work profi le.

Simrad AP80 Specifications

General

Brand	Simrad
Model	AP80
Category	Marine Equipment
Language	English