Simrad CP54 Manual

Index CP44/54 Chartplotter
Differential data 5-7
- DGPS information 6-9
- SDGPS information 6-11
- SDGPS systems 6-11
- status indicator & accuracy 5-7
DOP limit 6-8
DSC info 6-14
Echo menu 4-1
ETA & AVN display 5-10,A-1
External switch 8-10
Factory settings 8-12
- master reset 8-13
- power off - reset 8-13
- return to all factory presets 8-12
Fundamentals 2-1
Global Positioning System 1-1
Glossary of terms A-1
GOTO menu 3-14
- advance to next point 3-14
- restart to approaching point 3-14
- select NAV mode 3-14
- turn NAV off 3-14
GPS receiver type 8-4
How to get started 1-3
HDOP limit 6-8
Initial start-up 2-7
Interface setup, alarm output 8-10
Interface setup, NMEA 8-6,A-2
- default sentences 8-7
- description of sentences 8-8
- return to NMEA presets 8-12
Introduction 1-1
Key functions 2-3
-dedicated function keys 1-3
Key symbols in manual 1-2
Language 2-8,8-4
Light & contrast 2-7
Lines,
- delete all 7-10
- draw new line 3-15
- edit via chart 3-10,3-11
- edit via menu 7-10
- line list 7-9
- stored in the memory 7-9
Local time and date 8-3
Log 5-6,5-7
- reset 5-7
- speed calibration 8-4,A-1
- speed sensor 8-4
Loran C 6-6
- list of Loran C chains 6-6
Maintenance 9-2
Master reset 8-13
Measurement units 8-6,A-2
- setup 8-4
Memory,
- delete 8-12
- used 8-12
Menu bar 2-5
Menu layout 2-6
Miscellaneous menu 6-1
MOB function back of front cover
- alarm and navigation 5-19
- check last activated MOB 5-19,7-15
- external switch 8-10
- turn MOB function off 5-19
Naming of routes, points, etc. 2-7
Navigation,
- advance to next point 3-14
- Approx.Velocity Necessary 5-10
- auto waypoint shift 5-3
- cursor navigation 5-14
- Estimated Time of Arrival 5-10
- examples 5-14
- highway display 5-5
- orientation on chart 3-17
- restart to approaching point 3-14
- route navigation 5-16
- set & drift display 5-12

Simrad CP54 Specifications

General

Brand	Simrad
Model	CP54
Category	GPS
Language	English