Simrad CP54 Manual

CP44/54 Chartplotter Index
Navigation - continued,
- setup 5-3
- simulator 8-9,A-2
- track navigation 5-17
- trim & highway display 5-11
- turn navigation off 3-14,5-15
- waypoint navigation 5-15
NMEA interface 8-6
- return to NMEA presets 8-12
Page system 2-1
- exchange a display 2-2
- exchange a page 2-2
- preset pages 2-1
- rotation inverval 8-4
Palette setup 8-11
PDOP limit 6-8
Pilot menu 5-1
- custom display 5-1,5-13
- ETA & AVN 5-10, A-1
- highway display 5-3,5-5
- NAV active 5-5
- NAV inactive 5-3
- shortcut to pilot serie 5-1
PLOT menu 3-15
- draw line 3-15
- make route 3-15
- plot ship’s position as WP 3-15
- plot target 3-15
- plot waypoint 3-15
- set vertical mark 3-15
Position
- display 5-6
- display setup 5-7
- flashing 5-6,A-2
- setup 8-3
- start 8-3
- update alarm 6-7,6-8
Power off 2-8
Power on 2-7
QuickGuide 8-13
Repair and service 9-2
Routes,
- calculation 7-8
- delete all 8-12
- edit via chart 3-10,3-11
- edit via menu 7-4,7-5,7-6
- make new route from WP list 7-6
- menu 7-1
- navigation 5-16
- navigation setup 5-3
- plot new route 3-15
- route list 7-3
- stored in the memory 7-3
- time to go 7-8
Safety summary 1-2
Satellite status 6-7
Satellites in SDGPS system 6-13
- tracking state 6-13
Setup menu 8-1
Show test display 8-12
Software version 8-4
Specifications 9-3
Speed,
- average 5-9
- diagram 6-3
- display as SOG/STW 8-4
- dual speed display 5-9
- filter 8-3
- over ground 5-6,6-4
- setup 8-4
- through water 5-9
Status indicator and accuracy 5-7
Symbols 2-7
Targets,
- delete all 8-12
- edit via chart 3-13
- plot new target 3-15
- setup / edit target 7-14,7-15
- stored in the memory 7-14
Track function 7-11
- auto trackpoint shift A-1
- delete all 8-12
- display track 7-11

Simrad CP54 Specifications

General

Brand	Simrad
Model	CP54
Category	GPS
Language	English