Chassis
Radome (bottom)
Mounting base
Washer
Spring washer
M10 Hexagonal bolt
Included
Fix four bolts
660 mm (26.4”)
255 mm
(10.2”)
CX34/44/54-series Installation 1-35
RB715A Radome scanner
• 65 cm radome
• 4 kW
• Range up to 36 nm
• Rotation speed 24 or 48 rpm
• Beamwidth: Horizontal 3.9°
Vertical 25°
DRILLING TEMPLATE
The bolts included with your radar
equipment will suffice for mount base
thickness of 9 to 14 mm (0.35 to 0.55
in.). If the mount base is thicker or thin-
ner than this, prepare bolts as listed on
page 1-31.
Silicone should be applied to secure the
bolts. Do not use locking putty, as it
may damage the radome.
To Next Page
Loading...
