Simrad GO7 - Rear Connections and Card Reader

Rear connections and Card reader
1 NMEA 2000 - data input / output
2 Power - 12 V supply input
3 Sonar - CHIRP, Broadband Sounder, and DownScan
Imaging
4 Card reader
Card reader
Used for attaching a microSD memory card. The memory card can
be used for detailed chart data, software updates, transfer of user
data, and system backup.
The card reader door is opened by pulling the rubber cover open.
The card reader door should always be securely shut immediately
after inserting or removing a card, in order to prevent possible water
ingress.
Overview | GO7 Installation Manual
11