• Controlling power state of the unit (Yellow wire).
• Connecting to an external alarm (Blue wire).
1 Power cable connector
2 12 V positive wire (red) shown with fuse holder fitted
3 12 V negative wire (black)
4 Power control wire (yellow)
5 Alarm wire (blue)
6 Vessel’s 12 V DC supply
Connect Red to (+) DC using a 3 amp fuse.
Connect Black to (-) DC.
The unit can be powered on and off using the power button on the
front of the case.
Power control connection
The yellow Power Control wire on the GO7 power cable is an input
that will turn on the unit when power is applied.
16
Wiring | GO7 Installation Manual
To Next Page
Loading...
