Simrad Maris ECDIS900 - Basic Operational Procedures

To Next Page

To Previous Page

Page 12

MARIS ECDIS900 Installation Manual

FACTORY DEFAULTS FOR MARIS ECDIS900 MK15/16

All computers leave the factory with these settings.

Windows 7 logon:

Computer name: Monitoring

Workgroup: Maris

User name: Maris

Password: Empty

Network:

Unused networks are disabled.

Serial interface:

Note:

The sensor names must not contain spaces – use the underscore character. The

maximum length is 6 characters in accordance with SIS4000-MK2 specifications.

Name Type IP-Address Subnet mask Gateway/DNS

ECDIS network

Optional 2

IP Cx to

MARIS Router

Work 192.168.3.150

192.168.123.150

255.255.255.0

192.168.123.1/

192.168.123.1

Sensor network Public 192.168.4.200 255.255.255.0 Not used

PcRadar network Public 192.168.5.200 255.255.255.0 Not used

Monitoring SIS4000-Mk2

GPS Ch1, port 8010

Gyro Ch2, port 8011

Log Ch3, port 8012

ARPA_X Ch4, port 8013

Wind Ch5, port 8014

ES Ch6, port 8015

Navtex Ch7, port 8016

AIS Ch8, port 8017

Other manuals for Simrad Maris ECDIS900