MARIS ECDIS900 Installation Manual
This is reserved for PC Radar 6.0 network module.
Disable unused network connections.
In general (and regardless of the computer model) all unused connections must be disabled
in order not to waste system resources.
NETWORK BINDINGS
Continue from Network and Sharing Center/Change Adapter Settings.
On the menu line click Advanced and then Advanced Settings.
d) Select ECDIS network and move it to the top of the list.
e) Select Sensor network and move it to the second line of the list.
f) Select PcRadar network and move it to the third line of the list.
Other adapters are not important, but it is important that the ECDIS network is listed as #1,
Sensor network as #2 and PcRadar network as #3.
To Next Page
Loading...
