MARIS ECDIS900 Installation Manual
DUAL ECDIS
MINIMUM CONFIGURATION
This is the typical configuration on board most ships.
The system meets IMO minimum requirements for sailing paperless. Note that the mandatory
signals are hardwired to each computer. One fail does not affect the rest of the equipment
that stays fully functional. The ECDIS computers are networked, so charts, routes etc. can
be shared among the computers. Additional sensors, for example AIS and ARPA, can be
connected to the free ports and shared over the network.
ECDIS MK15 CONFIGURATION (DUAL)
STANDARD DELIVERY OF ECDIS MK15
• Two split units (PC and monitor)
• Network switch
ECDIS MK5 CONFIGURATION (DUAL)
To Next Page
Loading...
