MARIS ECDIS900 Installation Manual
TIME AND DATE
The time and date are important for chart updates. Enter BIOS and change the settings as
listed in the tables found in chapter BIOS settings.
Restart and set Windows Date/Time to UTC, Time Zone = Coordinated Universal Time.
NETWORK BASICS, ECDIS NETWORK
Change settings for TCP/IPv4 as shown in the table.
Other items including TCP/IPv6 are not used and must be left as is.
Computer name Workgroup IP-Address Subnet mask Gateway
Monitoring MARIS 192.168.X.150 255.255.255.0 Not used
Planning1 MARIS 192.168.X.151 255.255.255.0 Not used
Planning2 MARIS 192.168.X.152 255.255.255.0 Not used
Planning3 MARIS 192.168.X.153 255.255.255.0 Not used
Planning4 MARIS 192.168.X.154 255.255.255.0 Not used
To Next Page
Loading...
