MARIS ECDIS900 Installation Manual
DEAD MAN ALARM
The Dead Man Alarm function is designed to monitor bridge activity and alert the
master or other qualified navigators if the bridge becomes unattended.
If the mouse or keyboard has not been used for a fixed period (By default 10 min), the
module sends an alarm message (pulse) to the BNWAS system connected by PLC to
the PC.
Configuration in Application Manager
1) Activate “Administrator mode”.
2) Press the button and then
3) Activate the function .
Configuration in SMonitor
1) Create (if does not exist) "Alarm Relay Box" sensor. Connect the dedicated serial
port to Relay Box using the proper cable (here is COM1).
2) In the alarm Box sensor panel, populate the “Output mask DEADMAN" which
defines the pins that are pulsed when Application Manager sends an alarm
message. (See PLC manual)
BACKUP AND RESTORE
REDO BACKUP
Solution for Backup and Restore Images From or To Hard drive, using and External Hard Drive
(Minimum 500GB) to store disk images.
http://redobackup.org/download.php
Create Bootable CD:
Download iso file from
http://sourceforge.net/projects/redobackup/?source=typ_redirect
File redobackup-livecd-1.0.4.iso, and create a bootable CD.
Create a bootable USB Drive (when PC without CD Drive):
To Next Page
Loading...
