MARIS ECDIS900 Installation Manual
Application Manager main window in
Operational mode showing the programs
you have allowed to run.
Note: Your configuration will differ,
depending of what programs are installed
on the computer.
Application Manager main window shown in
Service (non-approved) mode.
f) Last steps
Never leave the computer in Service mode!
It is against regulations and navigators can, and will, make changes to the system.
When configuration is complete, the Operational mode must be selected to run the
ECDIS900 in Approval mode.
To select Operational mode, press the button
The PC is now restarted in Approval mode.
To Next Page
Loading...
