MARIS ECDIS900 Installation Manual
1) Select Service mode
Click the button with a yellow key and then click the button with a red shield .
Enter password and restart. The computer restarts in maintenance mode and
Application Manager is not running.
2) Setting up Auto Start Programs
Press the button . Edit the list by pressing the button AUTO .
Populate the list with the programs installed on the computer. This example shows a
computer running ECDIS900, PC Radar Kit and Navtex Master.
Programs listed here will always run and cannot be shut down. If you try to close a
program or it stops, it will be started again automatically.
3) Setting up Other Programs
Click the button “Other”. Populate the list with other useful programs.
The applications listed in OTHER could be started by user demand by clicking the
appropriate button. These applications can be stopped.
To Next Page
Loading...
